NMEA TO ANSCHUTZ CONVERTER ANSCHUTZ CONVERTER

NTAC-22 NMEA Course Bus Data Converter

NMEA Anschutz converter is used to NMEA heading data to Anschutz course bus data format.

In the case of replacing the installed defective Anschutz gyro compass, by converting the NMEA data from the device to be installed to the Anschutz course bus format, you can quickly operate the repeaters and other devices using the Anschutz course bus protocol untouched. You do not have to pull cables and install new devices. In this way, the installed devices are not affected by the replacement. This saves time and costs.

The converter accepts HDT, ROT, THS telegrams to convert signal to Coursebus data. Default input speed is 4800bps, output speed is 9600bps. Different input-output speed options can be adjusted with DIP switches on the board.

The NTAC-22 can be powered within the range of 9~32 VDC. The nominal voltage of 24 VDC is advised for powering the device in normal operation. Power input port has a protection for incorrect polarity connection of the supplying voltage.

It is support STD-20 and STD-22 gyrocompass. The converter has been tested on STD-20 and STD-22 gyros.

We are a manufacturer company in marine electronics. Get the best prices.

NTAC-22-NMEA-TO-COURSEBUS-CONVERTER-Manual Download

NMEA Anschutz Course Bus Converter
NMEA to Anschutz Converter
Technical Specifications
Supply Voltage9-32VDC Power supply
Power Supply ProtectionReversed polarity protection
Internal resetable fuse
ProtocolNMEA0183, IEC61162
Input data$xxHDT, $xxROT, $xxTHS
Output dataAnschutz Coursebus data
Input1 x Galvanic isolated Input
Output1 x RS422
2 x RS422 (Optional)
Input SpeedConfigurable with DIP Swithces 4800, 9600, 38400, 115200 bps
Output SpeedConfigurable with DIP Swithces 4800, 9600, 38400, 115200 bps
Screw type terminals
Case – DimensionsABS DIN Rail Mount Box
Width: 105 mm
Depth: 86 mm
Height: 58 mm